Pay attention to the use of wire cutting machine

The wire cutting machine is mainly composed of three parts: a machine tool, a numerical control system and a high-frequency power supply. The numerical control system is composed of a single-chip microcomputer, a keyboard, and a frequency conversion detection system. It has the main functions of gap compensation, linear interpolation, circular interpolation, and automatic processing of broken wires. It can cut materials, such as high-strength, high toughness, high hardness, high brittleness, magnetic materials, and precision small and complex-shaped parts. Wire cutting technology and wire cutting machine tools are being widely used in all walks of life.
1. Wire cutting machines have high requirements for the use environment. The temperature changes in the working environment throughout the year are required to be small. If the sun in the factory is particularly sufficient, there will often be particularly dazzling sunlight directly shining in through the windows. , Then it will have a bad impact on the work of the machine tool, so the location of the factory must be selected. There are many requirements to use this kind of machine. If any one of the requirements is not met, it will not be able to play the role of the machine.

 

If it is necessary to process very precise parts, the temperature requirements will be more stringent, and the parts should be processed in an environment of about 20 degrees Celsius.

 

2. When setting the specific number of processing and the voltage at work, it should be set according to the specific processing situation.

 

When processing, the processing material must be kept at a certain distance from the molybdenum wire, so that the processing can reduce the occurrence of accidents.

 

When operating the machine tool, it is necessary to put an insulating liquid such as kerosene inside the machine tool, because the machine tool will have a certain discharge during the working process, and if this liquid is used, some waste products can also be discharged.

 

3. The wire cutting machine tool will emit a lot of heat when it is working. If the working environment temperature is too high, it will have a great impact on the machine and also affect the service life of the machine.

 

And the machine also emits some strong electromagnetic waves when it is working. If the factory does not take some shielding measures, it will cause great damage to the workers and the surroundings of the factory, and the workshop where the machine works needs special ventilation.

 

wire cutting machine is mainly composed of three parts: machine tool, numerical control system and high frequency power supply. The numerical control system is composed of a single-chip microcomputer, a keyboard, and a frequency conversion detection system. It has the main functions of gap compensation, linear interpolation, circular interpolation, and automatic processing of broken wires. It can cut materials, such as high-strength, high toughness, high hardness, high brittleness, magnetic materials, and precision small and complex-shaped parts. Wire cutting technology and wire cutting machine tools are being widely used in all walks of life.